For this, the unit provides simple 2-point (on/off) control, continuous PID control, or 3-point stepping control. The process value signal is connected via a universal input. A supplementary analog input can be used for heating current measurement or as an external setpoint input.
The KS 40-1 has three process outputs that can be 3 relays or 2 relays plus a universal output. This universal output can be used for operating a solid-state relay, a continuous current/voltage output or to energize a two-wire transmitter.
This controller is particularly well suited to the following industry applications:
- Furnaces and ovens
- Burners and boilers
- Plastics processing
- Driers
- BluePort® Front interface and BlueControl Software
- Maintenance manager and error list
- Automatic/Manual key
- Monitoring of heating current and input circuit
- Timer and programmer
- Extended limit signalling function with latch
- Type tested to EN 14597 (replaces DIN 3440), cULus
| Dimensions and size: | 96m x 48mm x 118mm (HxWxD), 1/8 DIN |
| Connectors: | Pin or screw terminals |
| Primary Input Type: | Universal (TC, RTD, DC linear mA/mV) |
| Other Inputs: | External setpoint, Heating current monitoring |
| Output Type: | Relay, Logic, Linear mA/VDC |
| Max. Number of Outputs: | 3 |
| Scan Time: | 100 ms |
| Control Type: | 2-point (on/off), continuous PID control, or 3-point stepping |
| Number of Programmer Segments: | 4 |
| Power Supply: | 90-260 VAC, 20,4-26,4 VAC: Frequency 48-62 Hz, 18-31 V DC |
| Communications: | Modbus RS422/485 |
| Panel Sealing: | IP65 |
| Certifications: | CE, cULus |
| Software Tools: | BlueControl |