TWO-POINT SINGLE-LOOP TEMPERATURE CONTROLLER PMA KS 42-1
For this purpose, the device provides simple two-state regulation (on / off), PID control and three-step control. The process signal is connected via a universal input. An additional input can be used to measure the heating current or as external setpoint input.
KS 42-1 has three process outputs, it can be 3 relay outputs or 2 relay outputs plus one universal one. The universal output can be used as a relay with constant status, voltage / current output or to supply a two-wire transmitter.
The controller is particularly well suited for the following applications:
- Stoves
- Burners and boilers
- Processing of plastics
- Dryers
Advantages and functions
- Front BluePort® interface and BlueControl software
- Service manager and error list
- Manual / automatic operation switch
- Monitoring of heating current and input circuit
- Timer and programmer
Dane techniczne
| Dimensions: | 96m x 96mm x 118mm (HxWxD), 1/4 DIN |
| Connection: | Pins or screw terminals |
| Main input: | Universal (TC, RTD, DC liniowy mA/mV) |
| Optional input: | External setpoint, heating current measurement |
| Output type: | Relay, logic, linear mA/VDC |
| Maximum number of outputs: | 3 |
| Scan time: | 100 ms |
| Regulation type: | Two-state (on / off), continuous PID, and three-step |
| Power supply: | 90-260 VAC, 20,4-26,4 VAC: 48-62 Hz, 18-31 V DC |
| Communication: | Modbus RS422/485 |
| Panel tightness class: | IP65 |
| Certificates: | CE, cULus, GL, GOST-R |
| Software: | BlueControl |